Hardware Options...
Listed below
are some of the optional components that can be added to existing systems.
All components are sold at vendor list prices without markup. When
purchased through us you can be assured that what is purchased is properly
configured for your application. When you buy direct from the
vendor, we can not assure that what is purchased is configured to operate
with other hardware in an integrated and synchronous fashion. This
all means that we eliminate purchase mistakes and reduce the time you
expend getting your hardware to work properly.
Ascension
Hardware Components
Ascension
MotionStar sensors
can be added individually.
Ascension
“Flock of Birds”
Electronics
unit, power supply and sensor
Standard
Range Transmitter
Extended Range with Extended Range Controller
Ascension
miniBirds
500
miniBird RS232 interface - Electronics unit, transmitter,
power supply and 1 sensor
800
miniBird RS232 interface - Electronics unit, transmitter, power supply and
1 sensor
Dual
ISA
card, transmitter and 2 mini800 sensors
Polhemus
Hardware Components
Polhemus
Liberty
- System Electronics Unit, 2" transmitter, and 4 or 8
receivers with USB
interface.
- Optional 4" transmitter
Polhemus
Fastrak - System
Electronic Unit, Power Supply, Transmitter and Receiver (add up to an
additional 3 Receivers). Interface
to the host computer via an RS-232.
Northern
Digital Hardware Components
Optotrak
3020 - Includes 1 position sensor with mounting bracket, System Control
Unit, PCI adapter card, 24 IRED markers and three 6-channel strober units,
and cables
Additional
3020 Sensor Camera to increase the measurement space and reduce lost
markers
Tetherless
Strober Controller Kit for tetherless connection to the system
6 Degree of
Freedom Rigid Body Sensors
Event
Markers
These devices help control the conduct of experiments
and precisely identify the occurrence of events of interest to the researcher.
FSR
Switches with Amplifier
Motor Control Stimulus Light
Switch with Digital I/O
connector
Hand Held Event Marker
Photo Relay Light Switch with Reflector
Additional
Quick Release Sensor Attachments
Especially designed to minimize soft tissue
movement and ensure rapid setup 
Thoracic column
Waist
Cuff
Wraps - specify extremity
Optional 16
Channel A/D Data Collection Module.
Includes A/D board by Computer
Boards with 16 channels of analogue input, an A/D interface panel with 16 BNC connectors
and digital I/O and analog out, software for processing forceplate and EMG
data.
Integrated
Video Hardware
Includes one high shutter speed camera, microphone, and software module
to capture and synchronize video images with other data sources.
Non-conductive
Precision Forceplates
The
Bertec NC-4060 non conductive
plate. Their built in base gives them
unusual flexibility when it comes to installation.
Bolt them to the floor or use them on top of carpet. With fixed gain
amplification and cabling, or
7 Gain
Amplifier w/ autozero
The AMTI BP-400600 non-conductive
plate. Requires a mounting plate
Hand
Transducers
Bertec PY6 Series - Custom six-component pylon
transducer made out of 7075-T6 aluminum.
ATI - F/T sensor system measures the full six components of force and
torque. Includes a transducer, shielded high-flex transducer cable and interface
power supply box and power supply cable. (Mini40 below)
AMTI's multi-component sensors incorporate
strain gages to measure forces and moments. Custom designed for various load
applications. Includes transducer, transducer-amplifier cable and
amplifier. The product below was developed to examine the upper body
forces and moments for tasks involving walkers, canes, or crutches.
EMG
Systems
MYOPAC
by Run Technologies. This compact system with belt unit is connected
to The Motion
Monitor™
by a single fiber optic cable and
generates precise signals that
meet or exceed all journal
requirements. 16 channels either
surface or indwelling
DATAPAC
2000 by Run Technologies. Users, please ask about our integrated data
sharing routines and bundled pricing for additional software modules.
MyoSystem
1200 by Noraxon provides both raw and integrated outputs by way of its
patented signal processing. It is
available in 4 channels or 8 channels.
Telemyo
by Noraxon is the tetherless version of EMG. Connection by radio
frequency telemetry provides unprecedented freedom of movement. It is
available in 4 channels or 8 channels.
Bagnoli
by Delsys is equipped with a
signal quality check, continuously
testing for the presence of
excessive line interference and/or
signal clipping.
It is available in 4 channels and 8 channels.
Optional Shock Mount Enclosures suitable for
shipping
Shock
mounted enclosed rack plus foam
lining.
Foam Lined Monitor
enclosures.
Foam Lined
Transmitter enclosures.
Last Updated
12/31/03
